RENEW WALLS ^ Back To Top ^

SURFACE PREPARATION

  • If the paint surface is imperfect as bumps, cracks or other, apply a thin layer of putty with a spatula, allow to dry 12 to 24 hours and then evenly with sanding grit not too thick (220). Remove all impurities and / or defects on the surface, then cleaned to remove all dust produced.
  • To determine the amount of paint to use, add the width of all walls and multiply by the height from floor to ceiling. A gallon of paint yields approximately 35 square meters.
  • If you want a better finish in those parts where there is more contact (around outlets, switches, handrails, etc ...) we recommend before painting cleaned with soap and water, pass the sand and let it dry, and this further eliminates the impurities and fat from the surface.

APPLICATION

  • Choose the right color and the best way is to examine the existing furniture in the room, the window decorations and other accessories with this look the colors of choice and make combinations.
  • If the color is very dark change is recommended to first give a coat of white to lighten the tone a little more clearly the existing and the new color.
  • To make this remodeling using water based paints, we recommend that TONNER VINILTON to have a fast drying, excellent coverage and is washable.
  • Prepare the paint up to ¼ gallon of water, mix well.
  • Cut brush edges and corners of the walls where it is difficult to paint with a roller.
  • Finally, paint the rest of the roller surface, if we want more coverage, apply two coats at an interval of 60 minutes between coats.
  • Finally, paint the rest of the roller surface, if we want more coverage, apply two coats at an interval of 60 minutes between coats.

TECHNIQUES FOR WOOD OR MDF^ Back To Top ^

Videos

You need Flash player 8+ and JavaScript enabled to view this video.